sn9c101 webcam /dev/video1

[|vann|]

#lsusb
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 003: ID 1241:1177 Belkin F8E842-DL Mouse
Bus 002 Device 002: ID 0c45:6001 Microdia Genius VideoCAM NB
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000

#dmesg|grep usb
usb 2-1: SN9C10[12] PC Camera Controller detected (vid/pid 0x0C45:0x6001)
usb 2-1: TAS5110C1B image sensor detected
usb 2-1: Initialization succeeded
usb 2-1: V4L2 device registered as /dev/video1
usb 2-1: Optional device control through 'sysfs' interface disabled <----
usbcore: registered new interface driver sn9c102

--------------------------------------------------
sn9c102-webcam - v0.7.2
--------------------------------------------------
Incompatible Device (BT878 video (Leadtek WinFast 20) detected on /dev/video0.
Searching for good devices.
No Device found as specified in configuration file!
Searched /dev/video0 through /dev/video9 for compatible cameras.
Is the Camera Plugged in? Do you have the kernel modules loaded?


http://www.linuxhq.com/kernel/v2.6/2...ux/sn9c102.txt

[|vann|]

I have this device more than 2 years and i used device on suse from 9.2 to 10.1 .On gnome meeting and ekiga this device worked using pwlib v4l2 plugin

Nothing can see device on /dev/video1 and just bttv card is detected
Why?

[|vann|]

I installed gspca kernel module like v4l2-tools says and made sn9c102.ko.old depmod -a
Now webcam works with v4l
Ekiga can`t open this device (i guess it`s pwlib]
Others opens device [amsn,spca-gui etc.]

Sorry for bad english