Fedora Linux Support Community & Resources Center
  #1  
Old 22nd May 2008, 03:47 PM
Zeppe|in Offline
Registered User
 
Join Date: Dec 2006
Posts: 40
[F9 - No sound] Detla 44 not detected by pulseaudio

Greetings!

My delta44 (maudio) is not listed in padevchooser and as a result i have no sound.

Any suggestions?

Thank you very much.

Code:
# /sbin/lspci | grep -i audio
01:09.0 Multimedia audio controller: VIA Technologies Inc. ICE1712 [Envy24] PCI Multi-Channel I/O Controller (rev 02)
Code:
# /sbin/lspci -s 01:09.0 -vn
01:09.0 0401: 1412:1712 (rev 02)
	Subsystem: 1412:d633
	Flags: bus master, medium devsel, latency 32, IRQ 17
	I/O ports at 9000 [size=32]
	I/O ports at 9400 [size=16]
	I/O ports at 9800 [size=16]
	I/O ports at 9c00 [size=64]
	Capabilities: [80] Power Management version 1
	Kernel driver in use: ICE1712
	Kernel modules: snd-ice1712
Code:
# /sbin/lspci -n | grep 01:09.0
01:09.0 0401: 1412:1712 (rev 02)

/etc/modprobe.conf is empty

Last edited by Zeppe|in; 22nd May 2008 at 05:25 PM.
Reply With Quote
  #2  
Old 23rd May 2008, 03:47 PM
Zeppe|in Offline
Registered User
 
Join Date: Dec 2006
Posts: 40
Any ideas?
Reply With Quote
  #3  
Old 23rd May 2008, 04:20 PM
e-town Offline
Registered User
 
Join Date: May 2008
Posts: 9
I've got the same card and had strange behavior with pulseaudio. I can get mine to detect and play the sample sound, but trying to get audio routed through it never worked. I pretty much just run jackd and let it do all the work.
Reply With Quote
  #4  
Old 23rd May 2008, 04:46 PM
Zeppe|in Offline
Registered User
 
Join Date: Dec 2006
Posts: 40
Quote:
Originally Posted by e-town
I've got the same card and had strange behavior with pulseaudio. I can get mine to detect and play the sample sound, but trying to get audio routed through it never worked. I pretty much just run jackd and let it do all the work.

Thank you for your response!

Can you please tell me your /etc/modprobe.conf configuration?
Reply With Quote
  #5  
Old 23rd May 2008, 05:15 PM
e-town Offline
Registered User
 
Join Date: May 2008
Posts: 9
I believe these are the lines of interest:

alias snd-card-0 snd-ice1712
options snd-card-0 index=0
options snd-ice1712 index=0
Reply With Quote
  #6  
Old 23rd May 2008, 07:56 PM
e-town Offline
Registered User
 
Join Date: May 2008
Posts: 9
Did you have any luck?
Reply With Quote
  #7  
Old 24th May 2008, 12:25 AM
Zeppe|in Offline
Registered User
 
Join Date: Dec 2006
Posts: 40
Quote:
Originally Posted by e-town
Did you have any luck?
I m afraid not. The sound isnt detected yet and is not listed at the padevchooser
Reply With Quote
  #8  
Old 24th May 2008, 10:29 AM
Zeppe|in Offline
Registered User
 
Join Date: Dec 2006
Posts: 40
Finaly I switched to alsa
Reply With Quote
  #9  
Old 18th August 2008, 04:38 PM
Zeppe|in Offline
Registered User
 
Join Date: Dec 2006
Posts: 40
{SOLVED} [Fedora 9 - No sound] Detla 44 not detected by pulseaudio

I find a solution here !!


Quote:
Automatic sound card detection isn't able to configure the
Delta card correctly, the card seems to be a bit too exotic
for that. So I'd say it's a HAL and/or PulseAudio problem.

Since the configuration process succesfully manages to open
the device - after much struggling - you probably can make
it work with static device configuration. The thing that the
configuration finally stumbles is that the channel map for
the sink and source aren't valid. That's because there isn't
a default channel map defined for 10 and 12 channels.

So, what you'll have to do is edit /etc/pulse/default.pa.
Comment out module-hal-detect and module-detect, and then
add these lines (if you don't need the sources, leave them
out):

# Load the on-board device:
load-module module-alsa-sink sink_name=intel-hda_out device=hw:0
load-module module-alsa-source source_name=intel-hda_in device=hw:0

# Load Delta 44:
load-module module-alsa-sink sink_name=delta_out device=hw:1 channels=10 channel_map=left,right,aux0,aux1,aux2,aux3,aux4,au x5,aux6,aux7
load-module module-alsa-source source_name=delta_in device=hw:1 channels=12 channel_map=left,right,aux0,aux1,aux2,aux3,aux4,au x5,aux6,aux7,aux8,aux9

# Set the default sink and source (not mandatory, intel-hda
# would probably be used without this):
set-default-sink
delta_out set-default-source delta_in


That configuration makes Delta a stereo device, in the sense
that if you play surround content, there will be sound only
in the first two channels. If you want a surround setup (or
want to have the stereo output on some other physical
connector(), edit the channel maps. Valid channel names are
listed in near the beginning of this page (under the "Device
Drivers" heading):

http://www.pulseaudio.org/wiki/Modules

If you wonder why I didn't set the 'channels' argument of
Delta to 2, that's because it seems that the device can't be
opened for just two channels. The auto-configurator managed
to open the device with 10 out and 12 in channels, that's
why I'm using those values.

This setup makes the assumption that the on-board device
will always be hw:0 and Delta will be hw:1. This isn't
necessary a valid assumption.

--
Tanu Kaskinen

Last edited by Zeppe|in; 18th August 2008 at 04:41 PM.
Reply With Quote
  #10  
Old 19th August 2008, 12:01 PM
Zeppe|in Offline
Registered User
 
Join Date: Dec 2006
Posts: 40
In fact this is my (working!) /etc/pulse/default.pa

Quote:
#!/usr/bin/pulseaudio -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, write to the Free Software Foundation,
# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.

.nofail

### Load something into the sample cache
#load-sample-lazy x11-bell /usr/share/sounds/gtk-events/activate.wav
load-sample-lazy pulse-hotplug /usr/share/sounds/startup3.wav
#load-sample-lazy pulse-coldplug /usr/share/sounds/startup3.wav
#load-sample-lazy pulse-access /usr/share/sounds/generic.wav

.fail

### Load audio drivers statically (it's probably better to not load
### these drivers manually, but instead use module-hal-detect --
### see below -- for doing this automatically)
#load-module module-alsa-sink
#load-module module-alsa-source device=hw:1,0
#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
#load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
#load-module module-null-sink
#load-module module-pipe-sink

### Automatically load driver modules depending on the hardware available
#z#.ifexists module-hal-detect.so
#z#load-module module-hal-detect
#z#.else
### Alternatively use the static hardware detection module (for systems that
### lack HAL support)
#z#load-module module-detect
#z#.endif

### Load several protocols
.ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
.endif
load-module module-native-protocol-unix

### Network access (may be configured with paprefs, so leave this commented
### here if you plan to use paprefs)
#load-module module-esound-protocol-tcp
#load-module module-native-protocol-tcp
#load-module module-zeroconf-publish

### Load the RTP reciever module (also configured via paprefs, see above)
#load-module module-rtp-recv

### Load the RTP sender module (also configured via paprefs, see above)
#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 description="RTP Multicast Sink"
#load-module module-rtp-send source=rtp.monitor

### Automatically restore the volume of playback streams
load-module module-volume-restore

### Automatically restore the default sink/source when changed by the user during runtime
load-module module-default-device-restore

### Automatically move streams to the default sink if the sink they are
### connected to dies, similar for sources
load-module module-rescue-streams

### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle

### Load X11 bell module
#load-module module-x11-bell sample=x11-bell

### Register ourselves in the X11 session manager
# Deactivated by default, to avoid deadlock when PA is started as esd from gnome-session
# Instead we load this via /etc/xdg/autostart/ and "pactl load-module" now
# load-module module-x11-xsmp

### Load additional modules from GConf settings. This can be configured with the paprefs tool.
### Please keep in mind that the modules configured by paprefs might conflict with manually
### loaded modules.
.ifexists module-gconf.so
.nofail
load-module module-gconf
.fail
.endif

### Publish connection data in the X11 root window
.ifexists module-x11-publish.so
.nofail
load-module module-x11-publish
.fail
.endif

### Make some devices default
#set-default-sink output
#set-default-source input






######zzzzzzzzzzzzz###########
# Load the on-board device: DISABLED VIA BIOS
#load-module module-alsa-sink sink_name=intel-hda_out device=hw:0
#load-module module-alsa-source source_name=intel-hda_in device=hw:0

# Load Delta 44:
load-module module-alsa-sink sink_name=delta_out device=hw:0 channels=10 channel_map=left,right,aux0,aux1,aux2,aux3,aux4,au x5,aux6,aux7
load-module module-alsa-source source_name=delta_in device=hw:0 channels=12 channel_map=left,right,aux0,aux1,aux2,aux3,aux4,au x5,aux6,aux7,aux8,aux9

# Set the default sink and source (not mandatory, intel-hda
# would probably be used without this):
set-default-sink delta_out
set-default-source delta_in
Reply With Quote
Reply

Tags
detected, detla, fedora, pulseaudio, sound

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
No sound after Pulseaudio update in Fedora 11 with M-Audio Delta 66 nils06 Using Fedora 13 5th November 2009 10:02 PM
No sound in Fedora 11 w PulseAudio thomas.hedden Using Fedora 2 14th October 2009 04:33 PM
HOWTO: Fedora 11 - Surround Sound w/ Pulseaudio Picomp314 Guides & Solutions (No Questions) 6 24th August 2009 02:25 PM
Pulseaudio or alsa problem. Sound works but no sound output spacie Hardware & Laptops 14 27th June 2009 04:08 PM
Fedora 8 - sound card detected but no sound gertdesmet Hardware & Laptops 1 10th November 2007 11:40 AM


Current GMT-time: 08:26 (Friday, 31-10-2014)

TopSubscribe to XML RSS for all Threads in all ForumsFedoraForumDotOrg Archive
logo

All trademarks, and forum posts in this site are property of their respective owner(s).
FedoraForum.org is privately owned and is not directly sponsored by the Fedora Project or Red Hat, Inc.

Privacy Policy | Term of Use | Posting Guidelines | Archive | Contact Us | Founding Members

Powered by vBulletin® Copyright ©2000 - 2012, vBulletin Solutions, Inc.

FedoraForum is Powered by RedHat
Monteros Travel Photos - Amman Travel Photos on Instagram - Hotan