Cisco VPN & Fedora

[rdmapes]

Good Evening All,
I am running Fedora II with Cisco VPN Client Version 4.0.4. I can log in to the remote network fine, but my screens stops painting when I access some of the servers that run a web service or machines that use a command line prompt. I have been playing around with the .pcf file and still cannot seem to get the screens to complete or stop locking up.
I have a laptop running XP with Cisco VPN Client 3.5.2. It works so I thought I would make the Linux .pcf file look the same. No go on that one. At one time I had it working on a older Linux version when I had RH8.
I was reading through some of the previous posts and did not see folks having the same issue, or maybe I missed the jist of some of the posts. If anyone has some insight I would greatly appreciate some info.

Regards,
Ron

[tchung]

I use Cisco VPN client 4.0.5 from Home to Work and it works very well.
I also learned Cisco released version 4.6 which might solve your problem.

Thomas

[crackers]

4.0.4-A didn't work, but 4.0.4-B fixes issues similar to the ones you seem to be experiencing.

My main difficulty has always been finding the dang tarball!

[rdmapes]

All,
This link has the 4.0.5, 4.6 client. While poking around I found where I could donwload it.
http://www.rz.uni-saarland.de/servic...n.htm#Software
College in Germany has it accessible.
Thanks for the replies I will try the updated client.

Enjoy,
Ron

[LoOoD]

I get this when I try using cisco vpn client 4.6 w/ FC2 right when it asks for the group password

Oct 21 23:45:40 g-man kernel: Badness in local_bh_enable at kernel/softirq.c:141
Oct 21 23:45:40 g-man kernel: [<c0125477>] local_bh_enable+0x77/0x80
Oct 21 23:45:40 g-man kernel: [<f8b11e19>] handle_vpnup+0x79/0x1a0 [cisco_ipsec]
Oct 21 23:45:40 g-man kernel: [<c01c38a2>] copy_to_user+0x32/0x50
Oct 21 23:45:40 g-man kernel: [<f8b11bf2>] interceptor_ioctl+0x122/0x130 [cisco_ipsec]
Oct 21 23:45:40 g-man kernel: [<c026ee0d>] dev_ifsioc+0x37d/0x3f0
Oct 21 23:45:40 g-man kernel: [<c026efd1>] dev_ioctl+0x151/0x270
Oct 21 23:45:40 g-man kernel: [<c0264c0b>] sock_ioctl+0x25b/0x270
Oct 21 23:45:40 g-man kernel: [<c015ae79>] fget+0x49/0x60
Oct 21 23:45:40 g-man kernel: [<c016b887>] sys_ioctl+0x107/0x280
Oct 21 23:45:40 g-man kernel: [<c0105f1d>] sysenter_past_esp+0x52/0x71
Oct 21 23:45:40 g-man kernel: Badness in local_bh_enable at kernel/softirq.c:141
Oct 21 23:45:40 g-man kernel: [<c0125477>] local_bh_enable+0x77/0x80
Oct 21 23:45:40 g-man kernel: [<c026ca15>] dev_remove_pack+0x5/0x10
Oct 21 23:45:40 g-man kernel: [<f8b11e62>] handle_vpnup+0xc2/0x1a0 [cisco_ipsec]
Oct 21 23:45:40 g-man kernel: [<c01c38a2>] copy_to_user+0x32/0x50
Oct 21 23:45:40 g-man kernel: [<f8b11bf2>] interceptor_ioctl+0x122/0x130 [cisco_ipsec]
Oct 21 23:45:40 g-man kernel: [<c026ee0d>] dev_ifsioc+0x37d/0x3f0
Oct 21 23:45:40 g-man kernel: [<c026efd1>] dev_ioctl+0x151/0x270
Oct 21 23:45:40 g-man kernel: [<c0264c0b>] sock_ioctl+0x25b/0x270
Oct 21 23:45:40 g-man kernel: [<c015ae79>] fget+0x49/0x60
Oct 21 23:45:40 g-man kernel: [<c016b887>] sys_ioctl+0x107/0x280
Oct 21 23:45:40 g-man kernel: [<c0105f1d>] sysenter_past_esp+0x52/0x71