Changing the load order of modprobe
In /etc/modprobe.conf, I have
alias host_adapter sata_sil
alias host_adapter1 aacraid
As you can see, there are 2 scsi controllers being loaded. I have only added the aacraid recently, so before that, I had these mappings:
SATA HD1 - /dev/sda
SATA HD2 - /dev/sdb
After getting aacraid installed, I now have
SCSI HD1 - /dev/sda
SATA HD1 - /dev/sdb
SATA HD2 - /dev/sdc
Because the SCSI is now /dev/sda, I cannot boot into linux anymore. I need to make the SCSI HD appear as /dev/sdc, but it always gets loaded first by the kernel. Any ideas?
There must be a way to tell the kearnel to load sata_sil before aacraid...