Fedora Linux Support Community & Resources Center

Go Back   FedoraForum.org > Fedora Resources > Guides & Solutions (No Questions)
FedoraForum Search

Forgot Password? Join Us!

Guides & Solutions (No Questions) Post your guides here (No links to Blogs accepted). You can also append your comments/questions to a guide, but don't start a new thread to ask a question. Use another forum for that.

Reply
 
Thread Tools Search this Thread Display Modes
  #31  
Old 19th June 2012, 12:45 AM
synic Offline
Registered User
 
Join Date: Mar 2005
Location: Brisbane, Australia
Age: 43
Posts: 266
linuxchrome
Re: F17 Nvidia guide

Hi Secipolla:

Did that. Back to 640 x 400 display, no other options to change resolution in settings.

Quote:
[root@mothership ~]# rpm -qa *\nvidia\* *\kernel\*|sort;uname -r;lsmod |grep -e nvidia -e nouveau;cat /etc/X11/xorg.conf

abrt-addon-kerneloops-2.0.10-4.fc17.x86_64
akmod-nvidia-295.59-1.fc17.x86_64
kernel-3.3.4-5.fc17.x86_64
kernel-3.4.0-1.fc17.x86_64
kernel-3.4.2-4.fc17.x86_64
kernel-devel-3.4.0-1.fc17.x86_64
kernel-devel-3.4.2-4.fc17.x86_64
kernel-headers-3.4.2-4.fc17.x86_64
kmod-nvidia-3.4.2-4.fc17.x86_64-295.59-1.fc17.1.x86_64
libreport-plugin-kerneloops-2.0.10-3.fc17.x86_64
nvidia-settings-1.0-18.fc17.x86_64
nvidia-xconfig-1.0-16.fc17.x86_64
xorg-x11-drv-nvidia-295.59-1.fc17.x86_64
xorg-x11-drv-nvidia-libs-295.59-1.fc17.x86_64
3.4.2-4.fc17.x86_64
nvidia 12353318 50
i2c_core 38028 3 i2c_piix4,nvidia,videodev
# RPM Fusion - nvidia-xorg.conf
#
Section "Device"
Identifier "Videocard0"
Driver "nvidia"
EndSection
[root@mothership ~]# lspci |grep VGA
01:00.0 VGA compatible controller: nVidia Corporation G94 [GeForce 9600 GT] (rev a1)
[root@mothership ~]#
I'm wondering why I am having so much trouble.

I only installed:
Quote:
yum install akmod-nvidia xorg-x11-drv-nvidia-libs
And then updated. Then updated grub2 via Fedora-Utils.

I'm a little stumped over this. I got nvidia working in Fedora 13, 14, 15 and 16. But I'm not sure where else to go with this one.

Should I be specifying the full path to the nvidia driver in my xorg?

GLX Gears was giving me:
Quote:
spinifex@mothership ~$ glxgears
48312 frames in 5.0 seconds = 9662.278 FPS
48293 frames in 5.0 seconds = 9658.521 FPS
So the frame rates are up by over 7500 fps so nvidia is loading.

How can I specify usable monitor resolutions in my xorg. (all my old Xorgs are long gone).

X Rand R says:
Quote:
xrandr
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 320 x 175, current 640 x 480, maximum 640 x 480
default connected 640x480+0+0 0mm x 0mm
640x480 50.0* 51.0 52.0 53.0 54.0 55.0
640x400 56.0
640x350 57.0
576x432 58.0
512x384 59.0 60.0 61.0 62.0 63.0
416x312 64.0
400x300 65.0 66.0 67.0 68.0 69.0
360x200 70.0
320x240 71.0 72.0 73.0 74.0
320x200 75.0
320x175 76.0
But my monitor is a brand new Korean Catleap that supports 2560x1440 native. That is the resolution that nouveau defaults to.

EDIT:

Found your post http://fedoraforum.org/forum/showthread.php?p=1584620 ... Working through it.
__________________
Discourse and Diatribe

Last edited by synic; 19th June 2012 at 01:13 AM.
Reply With Quote
  #32  
Old 19th June 2012, 11:38 AM
secipolla Offline
Registered User
 
Join Date: May 2011
Posts: 700
linuxfirefox
Re: F17 Nvidia guide

You can try to set the resolution through nvidia-settings.
Another way is to exit X and run nvidia-xconfig, it should detect you monitor properly and set the resolution.
Reply With Quote
  #33  
Old 20th June 2012, 10:56 PM
BryanPG19 Offline
Registered User
 
Join Date: Apr 2012
Location: Houston, TX
Posts: 4
linuxfirefox
Re: F17 Nvidia guide

Ok I hope my issue is an easy one. I fallowed the guid all worked awsome on several of my computers. One in paticulare with duel monitors and graphics cards is kind of hosed. In adjusting things after the install I tried twin view mode and restarted, thats when things didnt work out well. Gnome now goes into fallback mode, and even though I've removed one of the monitors and tried to reconfigure with "nvidia-settings" it wont seem to fix the issue of the system being stuck in twin view and gnome in fall back mode. Does any one have any ideas to assist. Relative info below.

Thanks

[root@FearMeLx X11]# rpm -qa *\nvidia\* *\kernel\*|sort;uname -r;lsmod |grep -e nvidia -e nouveau;cat /etc/X11/xorg.conf
abrt-addon-kerneloops-2.0.10-4.fc17.x86_64
akmod-nvidia-295.59-1.fc17.x86_64
kernel-3.3.4-5.fc17.x86_64
kernel-3.4.0-1.fc17.x86_64
kernel-3.4.2-4.fc17.x86_64
kernel-devel-3.4.2-4.fc17.x86_64
kernel-headers-3.4.2-4.fc17.x86_64
kmod-nvidia-3.4.2-4.fc17.x86_64-295.59-1.fc17.x86_64
libreport-plugin-kerneloops-2.0.10-3.fc17.x86_64
nvidia-settings-1.0-18.fc17.x86_64
nvidia-xconfig-1.0-16.fc17.x86_64
xorg-x11-drv-nvidia-295.59-1.fc17.x86_64
xorg-x11-drv-nvidia-libs-295.59-1.fc17.i686
xorg-x11-drv-nvidia-libs-295.59-1.fc17.x86_64
3.4.2-4.fc17.x86_64
nvidia 12353318 44
i2c_core 38028 3 i2c_i801,nvidia,videodev
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 295.53 (mockbuild@builder1.ovh.rpmfusion.lan) Tue May 22 21:10:13 CEST 2012

# RPM Fusion - nvidia-xorg.conf
#

Section "ServerLayout"

# Removed Option "Xinerama" "0"
# Removed Option "Xinerama" "1"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection

Section "InputDevice"

# generated from data in "/etc/sysconfig/keyboard"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbLayout" "us"
Option "XkbModel" "pc105"
EndSection

Section "InputDevice"

# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Samsung SyncMaster"
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 75.0
EndSection

Section "Monitor"
Identifier "Monitor1"
VendorName "Unknown"
ModelName "Samsung SyncMaster"
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 75.0
EndSection

Section "Device"
Identifier "Videocard0"
Driver "nvidia"
EndSection

Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTX 570"
BusID "PCI:2:0:0"
EndSection

Section "Device"
Identifier "Device1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTX 570"
BusID "PCI:2:0:0"
Screen 1
EndSection

Section "Screen"
Identifier "Default Screen"
Device "Videocard0"
Monitor "Monitor0"
EndSection

Section "Screen"

# Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+0, DFP-3: nvidia-auto-select +1920+0"
# Removed Option "TwinView" "1"
# Removed Option "metamodes" "DFP-0: 1920x1200 +0+0, DFP-3: 1920x1200 +1920+0"
# Removed Option "TwinView" "0"
# Removed Option "metamodes" "DFP-0: 1920x1200 +0+0"
# Removed Option "TwinView" "1"
# Removed Option "metamodes" "DFP-0: 1920x1200 +0+0, DFP-3: 1920x1200 +1920+0"
# Removed Option "metamodes" "DFP-3: 1920x1200 +0+0"
# Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+0"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "TwinViewXineramaInfoOrder" "DFP-0"
Option "metamodes" "DFP-0: 1920x1200 +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection

Section "Screen"
Identifier "Screen1"
Device "Device1"
Monitor "Monitor1"
DefaultDepth 24
Option "TwinView" "0"
Option "metamodes" "DFP-3: 1920x1200 +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection

Section "Extensions"
Option "Composite" "Disable"
EndSection
Reply With Quote
  #34  
Old 22nd June 2012, 10:24 AM
synic Offline
Registered User
 
Join Date: Mar 2005
Location: Brisbane, Australia
Age: 43
Posts: 266
linuxopera
Re: F17 Nvidia guide

OK... a fresh install of Fedora 17.. I hosed the last one stuffing around with xorg and nvidia drivers.

Quote:
Originally Posted by secipolla View Post
You can try to set the resolution through nvidia-settings.
Another way is to exit X and run nvidia-xconfig, it should detect you monitor properly and set the resolution.
nvidia-settings wouldn't provide me with the resolution I require. I was capped at 640 x 480 (on a 2560 x 1440 LED monitor). It was unusable.

nvidia-xconfig auto detected and outputted the following xorg.conf.

PHP Code:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 295.53  (mockbuild@builder1.ovh.rpmfusion.lan)  Tue May 22 21:15:15 CEST 2012

# RPM Fusion - nvidia-xorg.conf


Section "ServerLayout"
    
Identifier     "Default Layout"
    
Screen         "Default Screen" 0 0
    InputDevice    
"Keyboard0" "CoreKeyboard"
    
InputDevice    "Mouse0" "CorePointer"
EndSection

Section 
"InputDevice"
    
# generated from data in "/etc/sysconfig/keyboard"
    
Identifier     "Keyboard0"
    
Driver         "keyboard"
    
Option         "XkbLayout" "us"
    
Option         "XkbModel" "pc105"
EndSection

Section 
"InputDevice"
    
# generated from default
    
Identifier     "Mouse0"
    
Driver         "mouse"
    
Option         "Protocol" "auto"
    
Option         "Device" "/dev/input/mice"
    
Option         "Emulate3Buttons" "no"
    
Option         "ZAxisMapping" "4 5"
EndSection

Section 
"Device"
    
Identifier     "Videocard0"
    
Driver         "nvidia"
EndSection

Section 
"Screen"
    
Identifier     "Default Screen"
    
Device         "Videocard0"
    
SubSection     "Display"
        
Modes      "nvidia-auto-select"
    
EndSubSection
EndSection 
I've also tried the 'additional drivers' in system settings from the menu in Gnome 3, but to no avail.

Xrandr gives me now (which is an improvement on my previous post).

PHP Code:
[root@mothership ~]# xrandr
Screen 0minimum 320 x 200current 2560 x 1440maximum 8192 x 8192
DVI
-I-1 connected 2560x1440+0+(normal left inverted right x axis y axis597mm x 336mm
   2560x1440      60.0
*+
DVI-I-2 disconnected (normal left inverted right x axis y axis

It's crazy. Nouveau autodetects and works almost perfectly bar the screen tearing when I try to play hi-res (1080p) videos ... but Nvidia, with all the coding and experience of a graphics card manufacturer, is unable to auto detect a simple screen resolution. I'ts got me stumped.

I'm down to editing xorg.conf so that when I try to install the nvidia drivers again, at least I can edit it manually to see if it works.

Now, a working nvidia xorg.conf anyone. Please post them so I can see what is going on with those who do have nvidia drivers working on their system.

I'm running Nouveau again if anyone wants to know.

Suggestions please. It's got to be something I'm doing wrong.

My monitor does have trouble with EDID... like it just doesn't give them. It's a Korean Yamakasi Catleap.

I just want to imput the screen res manually. A working xorg I can copy anyone?
__________________
Discourse and Diatribe

Last edited by synic; 22nd June 2012 at 10:28 AM.
Reply With Quote
  #35  
Old 22nd June 2012, 01:31 PM
secipolla Offline
Registered User
 
Join Date: May 2011
Posts: 700
linuxfirefox
Re: F17 Nvidia guide

AFAIK (which isn't much) xrandr doesn't work properly with the NVIDIA drivers (it doesn't have all the required features or something like that).
As you said, your monitor didn't send any info so there's no "Monitor" section in your Xorg.conf
You can create one by checking your monitor's manual for the supported resolution/refresh rate and then generating a modeline with the cvt command.
Check this post http://forums.fedoraforum.org/showpo...0&postcount=11 but don't put the last "Mode" line he put there, only the "Modeline".
Other simpler approach you may want to try before is just add to the "Screen" section, before 'nvidia-auto-select' another mode like '1600x900_60 +0+0'* (would be "1600x900_60 +0+0;nvidia-auto-select").
* a resolution/refresh rate you know your monitor supports (check the manual).
Reply With Quote
  #36  
Old 23rd June 2012, 12:53 AM
reflex Offline
Registered User
 
Join Date: Jun 2012
Location: US
Posts: 4
linuxfirefox
Re: F17 Nvidia guide

Been struggling to find and install the Nvidia legacy 96.xx driver for Fedora 17.

Here's my current setup:

01:00.0 VGA compatible controller: nVidia Corporation NV11DDR [GeForce2 MX200] (rev b2)
abrt-addon-kerneloops-2.0.10-4.fc17.i686
kernel-3.4.0-1.fc17.i686
kernel-3.4.2-4.fc17.i686
kernel-devel-3.4.0-1.fc17.i686
kernel-devel-3.4.2-4.fc17.i686
kernel-headers-3.4.2-4.fc17.i686
libreport-plugin-kerneloops-2.0.10-3.fc17.i686
nvidia-settings-1.0-18.fc17.i686
nvidia-xconfig-1.0-16.fc17.i686
3.4.0-1.fc17.i686
nouveau 732896 2
mxm_wmi 12727 1 nouveau
wmi 18273 2 mxm_wmi,nouveau
video 18503 1 nouveau
i2c_algo_bit 13065 1 nouveau
ttm 58609 1 nouveau
drm_kms_helper 31059 1 nouveau
drm 205771 4 ttm,drm_kms_helper,nouveau
i2c_core 28180 4 drm,drm_kms_helper,i2c_algo_bit,nouveau
cat: /etc/X11/xorg.conf: No such file or directory
Reply With Quote
  #37  
Old 23rd June 2012, 08:28 AM
Yellowman
Guest
 
Posts: n/a
linuxfirefox
Re: F17 Nvidia guide

Quote:
Originally Posted by reflex View Post
Been struggling to find and install the Nvidia legacy 96.xx driver for Fedora 17.

Here's my current setup:

01:00.0 VGA compatible controller: nVidia Corporation NV11DDR [GeForce2 MX200] (rev b2)
abrt-addon-kerneloops-2.0.10-4.fc17.i686
kernel-3.4.0-1.fc17.i686
kernel-3.4.2-4.fc17.i686
kernel-devel-3.4.0-1.fc17.i686
kernel-devel-3.4.2-4.fc17.i686
kernel-headers-3.4.2-4.fc17.i686
libreport-plugin-kerneloops-2.0.10-3.fc17.i686
nvidia-settings-1.0-18.fc17.i686
nvidia-xconfig-1.0-16.fc17.i686
3.4.0-1.fc17.i686
nouveau 732896 2
mxm_wmi 12727 1 nouveau
wmi 18273 2 mxm_wmi,nouveau
video 18503 1 nouveau
i2c_algo_bit 13065 1 nouveau
ttm 58609 1 nouveau
drm_kms_helper 31059 1 nouveau
drm 205771 4 ttm,drm_kms_helper,nouveau
i2c_core 28180 4 drm,drm_kms_helper,i2c_algo_bit,nouveau
cat: /etc/X11/xorg.conf: No such file or directory
Your card isn't supported by nvidia any more (rpmfusion hasn't packaged it for fedora since F13/14).
Reply With Quote
  #38  
Old 28th June 2012, 09:05 PM
Edouard Offline
Registered User
 
Join Date: Apr 2012
Location: Paris, France
Posts: 22
linuxfirefox
Re: F17 Nvidia guide

Hi guys,

I am now running Fedora 16 64b with nouveau driver.

Code:
rpm -qa *\nvidia\*  *\kernel\*|sort;uname -r;lsmod |grep -e nvidia -e nouveau;cat /etc/X11/xorg.conf
zsh: no matches found: *nvidia*
3.4.2-1.fc16.x86_64
nouveau               815574  0 
ttm                    79585  1 nouveau
mxm_wmi                12823  1 nouveau
wmi                    18697  3 nouveau,asus_wmi,mxm_wmi
drm_kms_helper         40233  2 nouveau,i915
drm                   244674  6 nouveau,ttm,i915,drm_kms_helper
i2c_algo_bit           13250  2 nouveau,i915
i2c_core               33895  7 nouveau,videodev,i2c_i801,i915,drm_kms_helper,drm,i2c_algo_bit
video                  18932  2 nouveau,i915
cat: /etc/X11/xorg.conf: Aucun fichier ou dossier de ce type
Code:
lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
01:00.0 VGA compatible controller: nVidia Corporation GF106 [GeForce GT 555M SDDR3] (rev a1)

So, here is the thing. I've followed this tutorial. when I reboot, I have this message :

Code:
Failed to start LSB: Builds and install new kmods from akmod packages
See 'systemctl status akmods.service' for details
So here I go:

Code:
systemctl status akmods.service
akmods.service - LSB : Builds and install new kmods from akmod packages
                  Loaded: loaded (/etc/rc.d/init.d/akmods)
                  Active: inactive (dead)
                  CGroup: name=systemd:/system/akmods.service
The weird thing is that, if just after the yum install akmod-nvidia I do a:
Code:
akmods
Checking kmods exist for 3.4.2-1.fc16.x86_64               [  OK  ]
so the compilation seems to be ok.

but when the pc reboots, the same command line (in single mode, I have to do this otherwise it machine is just stuck at the systemctl stuff) produces a

Code:
akmods
Could not find files needed to compile modules for 3.4.2-1.fc16x86_64

any ideas ? Please ask me if you want any more information.

Last edited by Edouard; 28th June 2012 at 09:09 PM.
Reply With Quote
  #39  
Old 29th June 2012, 04:24 AM
mikee Offline
Registered User
 
Join Date: Aug 2011
Location: Minnesota
Posts: 524
linuxfirefox
Re: F17 Nvidia guide

Thanks for this.
I have my dual monitor in a usable state after upgrading to F16 and the nvidia drivers.
Reply With Quote
  #40  
Old 7th July 2012, 06:22 AM
exiledangel420 Offline
Registered User
 
Join Date: Jul 2012
Location: watsontown
Posts: 47
linuxfirefox
Re: F17 Nvidia guide

Code:
My rpm -qa *\nvidia\*  *\kernel\*|sort;uname -r;lsmod |grep -e nvidia -e nouveau;cat /etc/X11/xorg.conf:

abrt-addon-kerneloops-2.0.10-3.fc17.i686
akmod-nvidia-173xx-173.14.35-1.fc17.i686
kernel-3.3.4-5.fc17.i686
kernel-3.4.4-3.fc17.i686
kernel-devel-3.4.4-3.fc17.i686
kernel-headers-3.4.4-3.fc17.i686
kmod-nvidia-173xx-3.4.4-3.fc17.i686-173.14.35-1.fc17.i686
libreport-plugin-kerneloops-2.0.10-3.fc17.i686
nvidia-settings-1.0-18.fc17.i686
nvidia-xconfig-1.0-16.fc17.i686
xorg-x11-drv-nvidia-173xx-173.14.35-1.fc17.i686
xorg-x11-drv-nvidia-173xx-libs-173.14.35-1.fc17.i686
3.4.4-3.fc17.i686
nvidia               7103834  18 
i2c_core               28180  2 i2c_viapro,nvidia
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 295.53  (mockbuild@builder1.ovh.rpmfusion.lan)  Tue May 22 21:19:06 CEST 2012

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0"
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
EndSection

Section "Files"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/input/mice"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
    # generated from data in "/etc/sysconfig/keyboard"
    Identifier     "Keyboard0"
    Driver         "kbd"
    Option         "XkbLayout" "us"
    Option         "XkbModel" "pc105"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Unknown"
    HorizSync       28.0 - 33.0
    VertRefresh     43.0 - 72.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

My lspci |grep VGA:

00:09.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5500] (rev a1)
01:00.0 VGA compatible controller: VIA Technologies, Inc. K8M800/K8N800/K8N800A [S3 UniChrome Pro] (rev 01)
How do I tell if my opengl/glx is enabled because it is doesn't show up on my nvidia-settings?
Oh and is it safe to update now that my driver is properly installer according to this guide?
Because I know updates can sometimes screw up the drivers.

---------- Post added at 05:22 AM ---------- Previous post was at 02:47 AM ----------

After updating I'm getting this alert
Code:
SELinux is preventing gnome-shell from execmod access on the file /usr/lib/nvidia/tls/libnvidia-tls.so.173.14.35.

*****  Plugin allow_execmod (91.4 confidence) suggests  **********************

If you want to allow gnome-shell to have execmod access on the libnvidia-tls.so.173.14.35 file
Then you need to change the label on '/usr/lib/nvidia/tls/libnvidia-tls.so.173.14.35'
Do
# semanage fcontext -a -t textrel_shlib_t '/usr/lib/nvidia/tls/libnvidia-tls.so.173.14.35'
# restorecon -v '/usr/lib/nvidia/tls/libnvidia-tls.so.173.14.35'

*****  Plugin catchall (9.59 confidence) suggests  ***************************

If you believe that gnome-shell should be allowed execmod access on the libnvidia-tls.so.173.14.35 file by default.
Then you should report this as a bug.
You can generate a local policy module to allow this access.
Do
allow this access for now by executing:
# grep gnome-shell /var/log/audit/audit.log | audit2allow -M mypol
# semodule -i mypol.pp

Additional Information:
Source Context                system_u:system_r:xdm_t:s0-s0:c0.c1023
Target Context                system_u:object_r:lib_t:s0
Target Objects                /usr/lib/nvidia/tls/libnvidia-tls.so.173.14.35 [
                              file ]
Source                        gnome-shell
Source Path                   gnome-shell
Port                          <Unknown>
Host                          
Source RPM Packages           
Target RPM Packages           xorg-x11-drv-nvidia-173xx-
                              libs-173.14.35-1.fc17.i686
Policy RPM                    selinux-policy-3.10.0-134.fc17.noarch
Selinux Enabled               True
Policy Type                   targeted
Enforcing Mode                Enforcing
Host Name                     
Platform                      
                              3.4.4-3.fc17.i686 #1 SMP Tue Jun 26 21:32:03 UTC
                              2012 i686 i686
Alert Count                   1
First Seen                    Sat 07 Jul 2012 12:57:52 AM EDT
Last Seen                     Sat 07 Jul 2012 12:57:52 AM EDT
Local ID                      b62eacaa-4aa1-4f14-a2ea-d96ea6f0b434

Raw Audit Messages
type=AVC msg=audit(1341637072.591:125): avc:  denied  { execmod } for  pid=24733 comm="gnome-shell" path="/usr/lib/nvidia/tls/libnvidia-tls.so.173.14.35" dev="sda1" ino=398245 scontext=system_u:system_r:xdm_t:s0-s0:c0.c1023 tcontext=system_u:object_r:lib_t:s0 tclass=file


Hash: gnome-shell,xdm_t,lib_t,file,execmod

audit2allowunable to open /sys/fs/selinux/policy:  Permission denied


audit2allow -Runable to open /sys/fs/selinux/policy:  Permission denied

Last edited by exiledangel420; 7th July 2012 at 06:25 AM.
Reply With Quote
  #41  
Old 7th July 2012, 06:49 AM
Yellowman
Guest
 
Posts: n/a
linuxfirefox
Re: F17 Nvidia guide

Quote:
Originally Posted by exiledangel420 View Post
Code:
My rpm -qa *\nvidia\*  *\kernel\*|sort;uname -r;lsmod |grep -e nvidia -e nouveau;cat /etc/X11/xorg.conf:

abrt-addon-kerneloops-2.0.10-3.fc17.i686
akmod-nvidia-173xx-173.14.35-1.fc17.i686
kernel-3.3.4-5.fc17.i686
kernel-3.4.4-3.fc17.i686
kernel-devel-3.4.4-3.fc17.i686
kernel-headers-3.4.4-3.fc17.i686
kmod-nvidia-173xx-3.4.4-3.fc17.i686-173.14.35-1.fc17.i686
libreport-plugin-kerneloops-2.0.10-3.fc17.i686
nvidia-settings-1.0-18.fc17.i686
nvidia-xconfig-1.0-16.fc17.i686
xorg-x11-drv-nvidia-173xx-173.14.35-1.fc17.i686
xorg-x11-drv-nvidia-173xx-libs-173.14.35-1.fc17.i686
3.4.4-3.fc17.i686
nvidia               7103834  18 
i2c_core               28180  2 i2c_viapro,nvidia
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 295.53  (mockbuild@builder1.ovh.rpmfusion.lan)  Tue May 22 21:19:06 CEST 2012

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0"
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
EndSection

Section "Files"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/input/mice"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
    # generated from data in "/etc/sysconfig/keyboard"
    Identifier     "Keyboard0"
    Driver         "kbd"
    Option         "XkbLayout" "us"
    Option         "XkbModel" "pc105"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Unknown"
    HorizSync       28.0 - 33.0
    VertRefresh     43.0 - 72.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

My lspci |grep VGA:

00:09.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5500] (rev a1)
01:00.0 VGA compatible controller: VIA Technologies, Inc. K8M800/K8N800/K8N800A [S3 UniChrome Pro] (rev 01)
How do I tell if my opengl/glx is enabled because it is doesn't show up on my nvidia-settings?
Oh and is it safe to update now that my driver is properly installer according to this guide?
Because I know updates can sometimes screw up the drivers.

---------- Post added at 05:22 AM ---------- Previous post was at 02:47 AM ----------

After updating I'm getting this alert
Code:
SELinux is preventing gnome-shell from execmod access on the file /usr/lib/nvidia/tls/libnvidia-tls.so.173.14.35.

*****  Plugin allow_execmod (91.4 confidence) suggests  **********************

If you want to allow gnome-shell to have execmod access on the libnvidia-tls.so.173.14.35 file
Then you need to change the label on '/usr/lib/nvidia/tls/libnvidia-tls.so.173.14.35'
Do
# semanage fcontext -a -t textrel_shlib_t '/usr/lib/nvidia/tls/libnvidia-tls.so.173.14.35'
# restorecon -v '/usr/lib/nvidia/tls/libnvidia-tls.so.173.14.35'

*****  Plugin catchall (9.59 confidence) suggests  ***************************

If you believe that gnome-shell should be allowed execmod access on the libnvidia-tls.so.173.14.35 file by default.
Then you should report this as a bug.
You can generate a local policy module to allow this access.
Do
allow this access for now by executing:
# grep gnome-shell /var/log/audit/audit.log | audit2allow -M mypol
# semodule -i mypol.pp

Additional Information:
Source Context                system_u:system_r:xdm_t:s0-s0:c0.c1023
Target Context                system_u:object_r:lib_t:s0
Target Objects                /usr/lib/nvidia/tls/libnvidia-tls.so.173.14.35 [
                              file ]
Source                        gnome-shell
Source Path                   gnome-shell
Port                          <Unknown>
Host                          
Source RPM Packages           
Target RPM Packages           xorg-x11-drv-nvidia-173xx-
                              libs-173.14.35-1.fc17.i686
Policy RPM                    selinux-policy-3.10.0-134.fc17.noarch
Selinux Enabled               True
Policy Type                   targeted
Enforcing Mode                Enforcing
Host Name                     
Platform                      
                              3.4.4-3.fc17.i686 #1 SMP Tue Jun 26 21:32:03 UTC
                              2012 i686 i686
Alert Count                   1
First Seen                    Sat 07 Jul 2012 12:57:52 AM EDT
Last Seen                     Sat 07 Jul 2012 12:57:52 AM EDT
Local ID                      b62eacaa-4aa1-4f14-a2ea-d96ea6f0b434

Raw Audit Messages
type=AVC msg=audit(1341637072.591:125): avc:  denied  { execmod } for  pid=24733 comm="gnome-shell" path="/usr/lib/nvidia/tls/libnvidia-tls.so.173.14.35" dev="sda1" ino=398245 scontext=system_u:system_r:xdm_t:s0-s0:c0.c1023 tcontext=system_u:object_r:lib_t:s0 tclass=file


Hash: gnome-shell,xdm_t,lib_t,file,execmod

audit2allowunable to open /sys/fs/selinux/policy:  Permission denied


audit2allow -Runable to open /sys/fs/selinux/policy:  Permission denied
Try

Code:
su
grep gnome-shell /var/log/audit/audit.log | audit2allow -M nvidiaisbroken
semodule -i nvidiaisbroken.pp

Last edited by Yellowman; 7th July 2012 at 07:09 AM.
Reply With Quote
  #42  
Old 7th July 2012, 06:58 AM
exiledangel420 Offline
Registered User
 
Join Date: Jul 2012
Location: watsontown
Posts: 47
linuxfirefox
Re: F17 Nvidia guide

Fix that. I figured out the command to check if my glx is working and it is not
Code:
my glxinfo:
name of display: :0.0
Error: glXCreateContext failed

96 GLX Visuals
    visual  x   bf lv rg d st  colorbuffer  sr ax dp st accumbuffer  ms  cav
  id dep cl sp  sz l  ci b ro  r  g  b  a F gb bf th cl  r  g  b  a ns b eat
----------------------------------------------------------------------------
0x021 24 tc  0  32  0 r  y .   8  8  8  8 .  .  0 24  8  0  0  0  0  0 0 None
0x022 24 dc  0  32  0 r  y .   8  8  8  8 .  .  0 24  8  0  0  0  0  0 0 None
0x113 24 tc  0  32  0 r  . .   8  8  8  8 .  .  0  0  0  0  0  0  0  0 0 None
0x114 24 tc  0  32  0 r  . .   8  8  8  8 .  .  0  0  0 16 16 16 16  0 0 Slow
0x115 24 tc  0  32  0 r  y .   8  8  8  8 .  .  0  0  0  0  0  0  0  0 0 None
0x116 24 tc  0  32  0 r  y .   8  8  8  8 .  .  0  0  0 16 16 16 16  0 0 Slow
0x117 24 tc  0  32  0 r  y .   8  8  8  8 .  .  0  0  0  0  0  0  0  0 0 None
0x118 24 tc  0  32  0 r  y .   8  8  8  8 .  .  0  0  0 16 16 16 16  0 0 Slow
0x119 24 tc  0  32  0 r  . .   8  8  8  8 .  .  0 24  0  0  0  0  0  0 0 None
0x11a 24 tc  0  32  0 r  . .   8  8  8  8 .  .  0 24  0 16 16 16 16  0 0 Slow
0x11b 24 tc  0  32  0 r  y .   8  8  8  8 .  .  0 24  0  0  0  0  0  0 0 None
0x11c 24 tc  0  32  0 r  y .   8  8  8  8 .  .  0 24  0 16 16 16 16  0 0 Slow
0x11d 24 tc  0  32  0 r  y .   8  8  8  8 .  .  0 24  0  0  0  0  0  0 0 None
0x11e 24 tc  0  32  0 r  y .   8  8  8  8 .  .  0 24  0 16 16 16 16  0 0 Slow
0x11f 24 tc  0  32  0 r  . .   8  8  8  8 .  .  0 24  8  0  0  0  0  0 0 None
0x120 24 tc  0  32  0 r  . .   8  8  8  8 .  .  0 24  8 16 16 16 16  0 0 Slow
0x121 24 tc  0  32  0 r  y .   8  8  8  8 .  .  0 24  8 16 16 16 16  0 0 Slow
0x122 24 tc  0  32  0 r  y .   8  8  8  8 .  .  0 24  8 16 16 16 16  0 0 Slow
0x123 24 tc  0  32  0 r  . .   8  8  8  8 .  .  0 32  0  0  0  0  0  0 0 None
0x124 24 tc  0  32  0 r  . .   8  8  8  8 .  .  0 32  0 16 16 16 16  0 0 Slow
0x125 24 tc  0  32  0 r  y .   8  8  8  8 .  .  0 32  0  0  0  0  0  0 0 None
0x126 24 tc  0  32  0 r  y .   8  8  8  8 .  .  0 32  0 16 16 16 16  0 0 Slow
0x127 24 tc  0  32  0 r  y .   8  8  8  8 .  .  0 32  0  0  0  0  0  0 0 None
0x128 24 tc  0  32  0 r  y .   8  8  8  8 .  .  0 32  0 16 16 16 16  0 0 Slow
0x129 24 tc  0  24  0 r  . .   8  8  8  0 .  .  0  0  0  0  0  0  0  0 0 None
0x12a 24 tc  0  24  0 r  . .   8  8  8  0 .  .  0  0  0 16 16 16  0  0 0 Slow
0x12b 24 tc  0  24  0 r  y .   8  8  8  0 .  .  0  0  0  0  0  0  0  0 0 None
0x12c 24 tc  0  24  0 r  y .   8  8  8  0 .  .  0  0  0 16 16 16  0  0 0 Slow
0x12d 24 tc  0  24  0 r  y .   8  8  8  0 .  .  0  0  0  0  0  0  0  0 0 None
0x12e 24 tc  0  24  0 r  y .   8  8  8  0 .  .  0  0  0 16 16 16  0  0 0 Slow
0x12f 24 tc  0  24  0 r  . .   8  8  8  0 .  .  0 24  0  0  0  0  0  0 0 None
0x130 24 tc  0  24  0 r  . .   8  8  8  0 .  .  0 24  0 16 16 16  0  0 0 Slow
0x131 24 tc  0  24  0 r  y .   8  8  8  0 .  .  0 24  0  0  0  0  0  0 0 None
0x132 24 tc  0  24  0 r  y .   8  8  8  0 .  .  0 24  0 16 16 16  0  0 0 Slow
0x133 24 tc  0  24  0 r  y .   8  8  8  0 .  .  0 24  0  0  0  0  0  0 0 None
0x134 24 tc  0  24  0 r  y .   8  8  8  0 .  .  0 24  0 16 16 16  0  0 0 Slow
0x135 24 tc  0  24  0 r  . .   8  8  8  0 .  .  0 24  8  0  0  0  0  0 0 None
0x136 24 tc  0  24  0 r  . .   8  8  8  0 .  .  0 24  8 16 16 16  0  0 0 Slow
0x137 24 tc  0  24  0 r  y .   8  8  8  0 .  .  0 24  8  0  0  0  0  0 0 None
0x138 24 tc  0  24  0 r  y .   8  8  8  0 .  .  0 24  8 16 16 16  0  0 0 Slow
0x139 24 tc  0  24  0 r  y .   8  8  8  0 .  .  0 24  8  0  0  0  0  0 0 None
0x13a 24 tc  0  24  0 r  y .   8  8  8  0 .  .  0 24  8 16 16 16  0  0 0 Slow
0x13b 24 tc  0  24  0 r  . .   8  8  8  0 .  .  0 32  0  0  0  0  0  0 0 None
0x13c 24 tc  0  24  0 r  . .   8  8  8  0 .  .  0 32  0 16 16 16  0  0 0 Slow
0x13d 24 tc  0  24  0 r  y .   8  8  8  0 .  .  0 32  0  0  0  0  0  0 0 None
0x13e 24 tc  0  24  0 r  y .   8  8  8  0 .  .  0 32  0 16 16 16  0  0 0 Slow
0x13f 24 tc  0  24  0 r  y .   8  8  8  0 .  .  0 32  0  0  0  0  0  0 0 None
0x140 24 tc  0  24  0 r  y .   8  8  8  0 .  .  0 32  0 16 16 16  0  0 0 Slow
0x141 24 dc  0  32  0 r  . .   8  8  8  8 .  .  0  0  0  0  0  0  0  0 0 None
0x142 24 dc  0  32  0 r  . .   8  8  8  8 .  .  0  0  0 16 16 16 16  0 0 Slow
0x143 24 dc  0  32  0 r  y .   8  8  8  8 .  .  0  0  0  0  0  0  0  0 0 None
0x144 24 dc  0  32  0 r  y .   8  8  8  8 .  .  0  0  0 16 16 16 16  0 0 Slow
0x145 24 dc  0  32  0 r  y .   8  8  8  8 .  .  0  0  0  0  0  0  0  0 0 None
0x146 24 dc  0  32  0 r  y .   8  8  8  8 .  .  0  0  0 16 16 16 16  0 0 Slow
0x147 24 dc  0  32  0 r  . .   8  8  8  8 .  .  0 24  0  0  0  0  0  0 0 None
0x148 24 dc  0  32  0 r  . .   8  8  8  8 .  .  0 24  0 16 16 16 16  0 0 Slow
0x149 24 dc  0  32  0 r  y .   8  8  8  8 .  .  0 24  0  0  0  0  0  0 0 None
0x14a 24 dc  0  32  0 r  y .   8  8  8  8 .  .  0 24  0 16 16 16 16  0 0 Slow
0x14b 24 dc  0  32  0 r  y .   8  8  8  8 .  .  0 24  0  0  0  0  0  0 0 None
0x14c 24 dc  0  32  0 r  y .   8  8  8  8 .  .  0 24  0 16 16 16 16  0 0 Slow
0x14d 24 dc  0  32  0 r  . .   8  8  8  8 .  .  0 24  8  0  0  0  0  0 0 None
0x14e 24 dc  0  32  0 r  . .   8  8  8  8 .  .  0 24  8 16 16 16 16  0 0 Slow
0x14f 24 dc  0  32  0 r  y .   8  8  8  8 .  .  0 24  8 16 16 16 16  0 0 Slow
0x150 24 dc  0  32  0 r  y .   8  8  8  8 .  .  0 24  8  0  0  0  0  0 0 None
0x151 24 dc  0  32  0 r  y .   8  8  8  8 .  .  0 24  8 16 16 16 16  0 0 Slow
0x152 24 dc  0  32  0 r  . .   8  8  8  8 .  .  0 32  0  0  0  0  0  0 0 None
0x153 24 dc  0  32  0 r  . .   8  8  8  8 .  .  0 32  0 16 16 16 16  0 0 Slow
0x154 24 dc  0  32  0 r  y .   8  8  8  8 .  .  0 32  0  0  0  0  0  0 0 None
0x155 24 dc  0  32  0 r  y .   8  8  8  8 .  .  0 32  0 16 16 16 16  0 0 Slow
0x156 24 dc  0  32  0 r  y .   8  8  8  8 .  .  0 32  0  0  0  0  0  0 0 None
0x157 24 dc  0  32  0 r  y .   8  8  8  8 .  .  0 32  0 16 16 16 16  0 0 Slow
0x158 24 dc  0  24  0 r  . .   8  8  8  0 .  .  0  0  0  0  0  0  0  0 0 None
0x159 24 dc  0  24  0 r  . .   8  8  8  0 .  .  0  0  0 16 16 16  0  0 0 Slow
0x15a 24 dc  0  24  0 r  y .   8  8  8  0 .  .  0  0  0  0  0  0  0  0 0 None
0x15b 24 dc  0  24  0 r  y .   8  8  8  0 .  .  0  0  0 16 16 16  0  0 0 Slow
0x15c 24 dc  0  24  0 r  y .   8  8  8  0 .  .  0  0  0  0  0  0  0  0 0 None
0x15d 24 dc  0  24  0 r  y .   8  8  8  0 .  .  0  0  0 16 16 16  0  0 0 Slow
0x15e 24 dc  0  24  0 r  . .   8  8  8  0 .  .  0 24  0  0  0  0  0  0 0 None
0x15f 24 dc  0  24  0 r  . .   8  8  8  0 .  .  0 24  0 16 16 16  0  0 0 Slow
0x160 24 dc  0  24  0 r  y .   8  8  8  0 .  .  0 24  0  0  0  0  0  0 0 None
0x161 24 dc  0  24  0 r  y .   8  8  8  0 .  .  0 24  0 16 16 16  0  0 0 Slow
0x162 24 dc  0  24  0 r  y .   8  8  8  0 .  .  0 24  0  0  0  0  0  0 0 None
0x163 24 dc  0  24  0 r  y .   8  8  8  0 .  .  0 24  0 16 16 16  0  0 0 Slow
0x164 24 dc  0  24  0 r  . .   8  8  8  0 .  .  0 24  8  0  0  0  0  0 0 None
0x165 24 dc  0  24  0 r  . .   8  8  8  0 .  .  0 24  8 16 16 16  0  0 0 Slow
0x166 24 dc  0  24  0 r  y .   8  8  8  0 .  .  0 24  8  0  0  0  0  0 0 None
0x167 24 dc  0  24  0 r  y .   8  8  8  0 .  .  0 24  8 16 16 16  0  0 0 Slow
0x168 24 dc  0  24  0 r  y .   8  8  8  0 .  .  0 24  8  0  0  0  0  0 0 None
0x169 24 dc  0  24  0 r  y .   8  8  8  0 .  .  0 24  8 16 16 16  0  0 0 Slow
0x16a 24 dc  0  24  0 r  . .   8  8  8  0 .  .  0 32  0  0  0  0  0  0 0 None
0x16b 24 dc  0  24  0 r  . .   8  8  8  0 .  .  0 32  0 16 16 16  0  0 0 Slow
0x16c 24 dc  0  24  0 r  y .   8  8  8  0 .  .  0 32  0  0  0  0  0  0 0 None
0x16d 24 dc  0  24  0 r  y .   8  8  8  0 .  .  0 32  0 16 16 16  0  0 0 Slow
0x16e 24 dc  0  24  0 r  y .   8  8  8  0 .  .  0 32  0  0  0  0  0  0 0 None
0x16f 24 dc  0  24  0 r  y .   8  8  8  0 .  .  0 32  0 16 16 16  0  0 0 Slow
0x082 32 tc  0  32  0 r  y .   8  8  8  8 .  .  0 24  8  0  0  0  0  0 0 None
Theirs another part but they are limitations on how many character I can post
It's okay for anything I need heavy graphics for i'll use ubuntu11.10 till I figure out how to fix it, that are or ill downgrade to a earlier viable fedora.
That's why I put that version ubuntu on my system cause I knew the graphic driver worked.

Last edited by exiledangel420; 7th July 2012 at 07:06 AM.
Reply With Quote
  #43  
Old 7th July 2012, 07:05 AM
Yellowman
Guest
 
Posts: n/a
linuxfirefox
Re: F17 Nvidia guide

Quote:
Originally Posted by exiledangel420 View Post
Fix that. I figured out the command to check if my glx is working and it is not
Code:
my glxinfo:
name of display: :0.0
Error: glXCreateContext failed

96 GLX Visuals
    visual  x   bf lv rg d st  colorbuffer  sr ax dp st accumbuffer  ms  cav
  id dep cl sp  sz l  ci b ro  r  g  b  a F gb bf th cl  r  g  b  a ns b eat
----------------------------------------------------------------------------
0x021 24 tc  0  32  0 r  y .   8  8  8  8 .  .  0 24  8  0  0  0  0  0 0 None
0x022 24 dc  0  32  0 r  y .   8  8  8  8 .  .  0 24  8  0  0  0  0  0 0 None
0x113 24 tc  0  32  0 r  . .   8  8  8  8 .  .  0  0  0  0  0  0  0  0 0 None
0x114 24 tc  0  32  0 r  . .   8  8  8  8 .  .  0  0  0 16 16 16 16  0 0 Slow
0x115 24 tc  0  32  0 r  y .   8  8  8  8 .  .  0  0  0  0  0  0  0  0 0 None
0x116 24 tc  0  32  0 r  y .   8  8  8  8 .  .  0  0  0 16 16 16 16  0 0 Slow
0x117 24 tc  0  32  0 r  y .   8  8  8  8 .  .  0  0  0  0  0  0  0  0 0 None
0x118 24 tc  0  32  0 r  y .   8  8  8  8 .  .  0  0  0 16 16 16 16  0 0 Slow
0x119 24 tc  0  32  0 r  . .   8  8  8  8 .  .  0 24  0  0  0  0  0  0 0 None
0x11a 24 tc  0  32  0 r  . .   8  8  8  8 .  .  0 24  0 16 16 16 16  0 0 Slow
0x11b 24 tc  0  32  0 r  y .   8  8  8  8 .  .  0 24  0  0  0  0  0  0 0 None
0x11c 24 tc  0  32  0 r  y .   8  8  8  8 .  .  0 24  0 16 16 16 16  0 0 Slow
0x11d 24 tc  0  32  0 r  y .   8  8  8  8 .  .  0 24  0  0  0  0  0  0 0 None
0x11e 24 tc  0  32  0 r  y .   8  8  8  8 .  .  0 24  0 16 16 16 16  0 0 Slow
0x11f 24 tc  0  32  0 r  . .   8  8  8  8 .  .  0 24  8  0  0  0  0  0 0 None
0x120 24 tc  0  32  0 r  . .   8  8  8  8 .  .  0 24  8 16 16 16 16  0 0 Slow
0x121 24 tc  0  32  0 r  y .   8  8  8  8 .  .  0 24  8 16 16 16 16  0 0 Slow
0x122 24 tc  0  32  0 r  y .   8  8  8  8 .  .  0 24  8 16 16 16 16  0 0 Slow
0x123 24 tc  0  32  0 r  . .   8  8  8  8 .  .  0 32  0  0  0  0  0  0 0 None
0x124 24 tc  0  32  0 r  . .   8  8  8  8 .  .  0 32  0 16 16 16 16  0 0 Slow
0x125 24 tc  0  32  0 r  y .   8  8  8  8 .  .  0 32  0  0  0  0  0  0 0 None
0x126 24 tc  0  32  0 r  y .   8  8  8  8 .  .  0 32  0 16 16 16 16  0 0 Slow
0x127 24 tc  0  32  0 r  y .   8  8  8  8 .  .  0 32  0  0  0  0  0  0 0 None
0x128 24 tc  0  32  0 r  y .   8  8  8  8 .  .  0 32  0 16 16 16 16  0 0 Slow
0x129 24 tc  0  24  0 r  . .   8  8  8  0 .  .  0  0  0  0  0  0  0  0 0 None
0x12a 24 tc  0  24  0 r  . .   8  8  8  0 .  .  0  0  0 16 16 16  0  0 0 Slow
0x12b 24 tc  0  24  0 r  y .   8  8  8  0 .  .  0  0  0  0  0  0  0  0 0 None
0x12c 24 tc  0  24  0 r  y .   8  8  8  0 .  .  0  0  0 16 16 16  0  0 0 Slow
0x12d 24 tc  0  24  0 r  y .   8  8  8  0 .  .  0  0  0  0  0  0  0  0 0 None
0x12e 24 tc  0  24  0 r  y .   8  8  8  0 .  .  0  0  0 16 16 16  0  0 0 Slow
0x12f 24 tc  0  24  0 r  . .   8  8  8  0 .  .  0 24  0  0  0  0  0  0 0 None
0x130 24 tc  0  24  0 r  . .   8  8  8  0 .  .  0 24  0 16 16 16  0  0 0 Slow
0x131 24 tc  0  24  0 r  y .   8  8  8  0 .  .  0 24  0  0  0  0  0  0 0 None
0x132 24 tc  0  24  0 r  y .   8  8  8  0 .  .  0 24  0 16 16 16  0  0 0 Slow
0x133 24 tc  0  24  0 r  y .   8  8  8  0 .  .  0 24  0  0  0  0  0  0 0 None
0x134 24 tc  0  24  0 r  y .   8  8  8  0 .  .  0 24  0 16 16 16  0  0 0 Slow
0x135 24 tc  0  24  0 r  . .   8  8  8  0 .  .  0 24  8  0  0  0  0  0 0 None
0x136 24 tc  0  24  0 r  . .   8  8  8  0 .  .  0 24  8 16 16 16  0  0 0 Slow
0x137 24 tc  0  24  0 r  y .   8  8  8  0 .  .  0 24  8  0  0  0  0  0 0 None
0x138 24 tc  0  24  0 r  y .   8  8  8  0 .  .  0 24  8 16 16 16  0  0 0 Slow
0x139 24 tc  0  24  0 r  y .   8  8  8  0 .  .  0 24  8  0  0  0  0  0 0 None
0x13a 24 tc  0  24  0 r  y .   8  8  8  0 .  .  0 24  8 16 16 16  0  0 0 Slow
0x13b 24 tc  0  24  0 r  . .   8  8  8  0 .  .  0 32  0  0  0  0  0  0 0 None
0x13c 24 tc  0  24  0 r  . .   8  8  8  0 .  .  0 32  0 16 16 16  0  0 0 Slow
0x13d 24 tc  0  24  0 r  y .   8  8  8  0 .  .  0 32  0  0  0  0  0  0 0 None
0x13e 24 tc  0  24  0 r  y .   8  8  8  0 .  .  0 32  0 16 16 16  0  0 0 Slow
0x13f 24 tc  0  24  0 r  y .   8  8  8  0 .  .  0 32  0  0  0  0  0  0 0 None
0x140 24 tc  0  24  0 r  y .   8  8  8  0 .  .  0 32  0 16 16 16  0  0 0 Slow
0x141 24 dc  0  32  0 r  . .   8  8  8  8 .  .  0  0  0  0  0  0  0  0 0 None
0x142 24 dc  0  32  0 r  . .   8  8  8  8 .  .  0  0  0 16 16 16 16  0 0 Slow
0x143 24 dc  0  32  0 r  y .   8  8  8  8 .  .  0  0  0  0  0  0  0  0 0 None
0x144 24 dc  0  32  0 r  y .   8  8  8  8 .  .  0  0  0 16 16 16 16  0 0 Slow
0x145 24 dc  0  32  0 r  y .   8  8  8  8 .  .  0  0  0  0  0  0  0  0 0 None
0x146 24 dc  0  32  0 r  y .   8  8  8  8 .  .  0  0  0 16 16 16 16  0 0 Slow
0x147 24 dc  0  32  0 r  . .   8  8  8  8 .  .  0 24  0  0  0  0  0  0 0 None
0x148 24 dc  0  32  0 r  . .   8  8  8  8 .  .  0 24  0 16 16 16 16  0 0 Slow
0x149 24 dc  0  32  0 r  y .   8  8  8  8 .  .  0 24  0  0  0  0  0  0 0 None
0x14a 24 dc  0  32  0 r  y .   8  8  8  8 .  .  0 24  0 16 16 16 16  0 0 Slow
0x14b 24 dc  0  32  0 r  y .   8  8  8  8 .  .  0 24  0  0  0  0  0  0 0 None
0x14c 24 dc  0  32  0 r  y .   8  8  8  8 .  .  0 24  0 16 16 16 16  0 0 Slow
0x14d 24 dc  0  32  0 r  . .   8  8  8  8 .  .  0 24  8  0  0  0  0  0 0 None
0x14e 24 dc  0  32  0 r  . .   8  8  8  8 .  .  0 24  8 16 16 16 16  0 0 Slow
0x14f 24 dc  0  32  0 r  y .   8  8  8  8 .  .  0 24  8 16 16 16 16  0 0 Slow
0x150 24 dc  0  32  0 r  y .   8  8  8  8 .  .  0 24  8  0  0  0  0  0 0 None
0x151 24 dc  0  32  0 r  y .   8  8  8  8 .  .  0 24  8 16 16 16 16  0 0 Slow
0x152 24 dc  0  32  0 r  . .   8  8  8  8 .  .  0 32  0  0  0  0  0  0 0 None
0x153 24 dc  0  32  0 r  . .   8  8  8  8 .  .  0 32  0 16 16 16 16  0 0 Slow
0x154 24 dc  0  32  0 r  y .   8  8  8  8 .  .  0 32  0  0  0  0  0  0 0 None
0x155 24 dc  0  32  0 r  y .   8  8  8  8 .  .  0 32  0 16 16 16 16  0 0 Slow
0x156 24 dc  0  32  0 r  y .   8  8  8  8 .  .  0 32  0  0  0  0  0  0 0 None
0x157 24 dc  0  32  0 r  y .   8  8  8  8 .  .  0 32  0 16 16 16 16  0 0 Slow
0x158 24 dc  0  24  0 r  . .   8  8  8  0 .  .  0  0  0  0  0  0  0  0 0 None
0x159 24 dc  0  24  0 r  . .   8  8  8  0 .  .  0  0  0 16 16 16  0  0 0 Slow
0x15a 24 dc  0  24  0 r  y .   8  8  8  0 .  .  0  0  0  0  0  0  0  0 0 None
0x15b 24 dc  0  24  0 r  y .   8  8  8  0 .  .  0  0  0 16 16 16  0  0 0 Slow
0x15c 24 dc  0  24  0 r  y .   8  8  8  0 .  .  0  0  0  0  0  0  0  0 0 None
0x15d 24 dc  0  24  0 r  y .   8  8  8  0 .  .  0  0  0 16 16 16  0  0 0 Slow
0x15e 24 dc  0  24  0 r  . .   8  8  8  0 .  .  0 24  0  0  0  0  0  0 0 None
0x15f 24 dc  0  24  0 r  . .   8  8  8  0 .  .  0 24  0 16 16 16  0  0 0 Slow
0x160 24 dc  0  24  0 r  y .   8  8  8  0 .  .  0 24  0  0  0  0  0  0 0 None
0x161 24 dc  0  24  0 r  y .   8  8  8  0 .  .  0 24  0 16 16 16  0  0 0 Slow
0x162 24 dc  0  24  0 r  y .   8  8  8  0 .  .  0 24  0  0  0  0  0  0 0 None
0x163 24 dc  0  24  0 r  y .   8  8  8  0 .  .  0 24  0 16 16 16  0  0 0 Slow
0x164 24 dc  0  24  0 r  . .   8  8  8  0 .  .  0 24  8  0  0  0  0  0 0 None
0x165 24 dc  0  24  0 r  . .   8  8  8  0 .  .  0 24  8 16 16 16  0  0 0 Slow
0x166 24 dc  0  24  0 r  y .   8  8  8  0 .  .  0 24  8  0  0  0  0  0 0 None
0x167 24 dc  0  24  0 r  y .   8  8  8  0 .  .  0 24  8 16 16 16  0  0 0 Slow
0x168 24 dc  0  24  0 r  y .   8  8  8  0 .  .  0 24  8  0  0  0  0  0 0 None
0x169 24 dc  0  24  0 r  y .   8  8  8  0 .  .  0 24  8 16 16 16  0  0 0 Slow
0x16a 24 dc  0  24  0 r  . .   8  8  8  0 .  .  0 32  0  0  0  0  0  0 0 None
0x16b 24 dc  0  24  0 r  . .   8  8  8  0 .  .  0 32  0 16 16 16  0  0 0 Slow
0x16c 24 dc  0  24  0 r  y .   8  8  8  0 .  .  0 32  0  0  0  0  0  0 0 None
0x16d 24 dc  0  24  0 r  y .   8  8  8  0 .  .  0 32  0 16 16 16  0  0 0 Slow
0x16e 24 dc  0  24  0 r  y .   8  8  8  0 .  .  0 32  0  0  0  0  0  0 0 None
0x16f 24 dc  0  24  0 r  y .   8  8  8  0 .  .  0 32  0 16 16 16  0  0 0 Slow
0x082 32 tc  0  32  0 r  y .   8  8  8  8 .  .  0 24  8  0  0  0  0  0 0 None
Theirs another part but they are limitations on how many character I can post
Try overwriting your old xorg.conf (a empty files section is a issue)

Code:
su
cd /etc/X11/
cp nvidia-173xx-xorg.conf xorg.conf
Reply With Quote
  #44  
Old 7th July 2012, 07:10 AM
exiledangel420 Offline
Registered User
 
Join Date: Jul 2012
Location: watsontown
Posts: 47
linuxfirefox
Re: F17 Nvidia guide

Try that I'm stlill getting the same thing on the glx info
Do I possibly need to reboot for it to take effect?
Reply With Quote
  #45  
Old 7th July 2012, 07:13 AM
Yellowman
Guest
 
Posts: n/a
linuxfirefox
Re: F17 Nvidia guide

Quote:
Originally Posted by exiledangel420 View Post
Try that I'm stlill getting the same thing on the glx info
Do I possibly need to reboot for it to take effect?
You do need to restart X.
Reply With Quote
Reply

Tags
f17, guide, nvidia

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Installing Nvidia Drivers In F20 Questions terry_g Hardware & Laptops 3 31st December 2013 07:14 PM
[SOLVED] F20 Beta to F20 Final yum update - core groups not found blueflame Installation, Upgrades and Live Media 6 20th December 2013 02:47 AM
hints needed F18>F20 upgrade PatMcLJr Installation, Upgrades and Live Media 5 19th December 2013 06:31 PM
F20 Nvidia no screen detected b4time F-20 Development Forum 2 11th November 2013 04:47 AM
F20 Beta TC5: Problem with F17 NVIDIA Guide taytong888 F-20 Development Forum 1 24th October 2013 06:11 AM


Current GMT-time: 17:55 (Monday, 20-10-2014)

TopSubscribe to XML RSS for all Threads in all ForumsFedoraForumDotOrg Archive
logo

All trademarks, and forum posts in this site are property of their respective owner(s).
FedoraForum.org is privately owned and is not directly sponsored by the Fedora Project or Red Hat, Inc.

Privacy Policy | Term of Use | Posting Guidelines | Archive | Contact Us | Founding Members

Powered by vBulletin® Copyright ©2000 - 2012, vBulletin Solutions, Inc.

FedoraForum is Powered by RedHat
Rio Blanco Photos on Instagram - Savonlinna Instagram Photos - Bantva