Fedora Linux Support Community & Resources Center
  #1  
Old 13th January 2006, 01:01 AM
satimis Offline
Registered User
 
Join Date: Jul 2004
Posts: 1,398
Wireless optical mouse problem

Hi folks,

FC3

Just have Intelligent wireless keyboard combo and wireless optical mouse installed. The keyboard works but the mouse does not work. The red light at the bottom of the mouse is on. Moving the mouse has no effect on the cursor. Now I have to use an USB mouse in combination.

# lspci -v
Code:
00:00.0 Host bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333]
        Flags: bus master, medium devsel, latency 0
        Memory at d0000000 (32-bit, prefetchable) [size=128M]
        Capabilities: [a0] AGP version 2.0
        Capabilities: [c0] Power Management version 2

00:01.0 PCI bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333 AGP] (prog-if 00 [Normal decode])
        Flags: bus master, 66Mhz, medium devsel, latency 0
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        Memory behind bridge: e0000000-e1ffffff
        Prefetchable memory behind bridge: d8000000-dfffffff
        Capabilities: [80] Power Management version 2

00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
        Subsystem: Realtek Semiconductor Co., Ltd. RT8139
        Flags: bus master, medium devsel, latency 32, IRQ 11
        I/O ports at d000 [size=256]
        Memory at e3000000 (32-bit, non-prefetchable) [size=256]

00:11.0 ISA bridge: VIA Technologies, Inc. VT8233 PCI to ISA Bridge
        Subsystem: VIA Technologies, Inc. VT8233 PCI to ISA Bridge
        Flags: bus master, stepping, medium devsel, latency 0
        Capabilities: [c0] Power Management version 2

00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
        Subsystem: VIA Technologies, Inc. VT82C586/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE
        Flags: bus master, medium devsel, latency 32
        I/O ports at d400 [size=16]
        Capabilities: [c0] Power Management version 2

00:11.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 18) (prog-if 00 [UHCI])
        Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
        Flags: bus master, medium devsel, latency 32, IRQ 11
        I/O ports at d800 [size=32]
        Capabilities: [80] Power Management version 2

00:11.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 18) (prog-if 00 [UHCI])
        Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
        Flags: bus master, medium devsel, latency 32, IRQ 11
        I/O ports at dc00 [size=32]
        Capabilities: [80] Power Management version 2

00:11.4 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 18) (prog-if 00 [UHCI])
        Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
        Flags: bus master, medium devsel, latency 32, IRQ 11
        I/O ports at e000 [size=32]
        Capabilities: [80] Power Management version 2

00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 10)
        Subsystem: Avance Logic Inc.: Unknown device 4710
        Flags: medium devsel, IRQ 5
        I/O ports at e400 [size=256]
        Capabilities: [c0] Power Management version 2

01:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2 MX/MX 400] (rev b2) (prog-if 00 [VGA])
        Subsystem: LeadTek Research Inc.: Unknown device 2830
        Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 10
        Memory at e0000000 (32-bit, non-prefetchable) [size=16M]
        Memory at d8000000 (32-bit, prefetchable) [size=128M]
        Capabilities: [60] Power Management version 2
        Capabilities: [44] AGP version 2.0
# cat /etc/X11/xorg.confg
Code:
.....
Section "InputDevice"
        Identifier  "Mouse0"
        Driver      "mouse"
        Option      "Protocol" "IMPS/2"
        Option      "Device" "/dev/input/mice"
        Option      "ZAxisMapping" "4 5"
        Option      "Emulate3Buttons" "yes"
EndSection
....
Please advise how to fix the problem.

TIA

B.R.
satimis
Reply With Quote
  #2  
Old 15th May 2006, 01:58 AM
TFrog Offline
Registered User
 
Join Date: Aug 2004
Posts: 41
I too am finding issues with Microsoft wireless mice in FC 5. Below is my mouse section of /etc/X11/xorg.confg:

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "yes"
EndSection

My biggest issue is that I get random lockups of the entire OS right after a cursor freeze. The mouse has good batteries and I have no issues with it inside Winbloze. However, I'm thinking it may be an issue with Firefox or directly related to Mozilla code. It always seems to happen when I'm browsing or using KTorrent search function. Otherwise the mouse works fine with the exception of the side to side scroll in apps. Maybe a USB driver issue??????? Not sure.
Reply With Quote
  #3  
Old 7th June 2006, 08:07 PM
LarryJ Offline
Registered User
 
Join Date: Nov 2005
Location: W. Montana, USA
Posts: 103
TFrog,

Are you using a M$ Wireless Laser Desktop 6000 wireless mouse and keyboard?

Larry
Reply With Quote
  #4  
Old 9th June 2006, 12:11 AM
netjrc Offline
Registered User
 
Join Date: Jun 2005
Posts: 66
HI, after the last update, my mouse works erratically, too.
It is a wireless 2.4Ghz Logiteck Mouse, and it works, but sometimes when I physically click, I get a double click on the screen. This means it is difficult to select text and sometimes it opens files when you just want to select it to move it someplace else.

So maybe it is not just a problem with you mice, but with the system itself.
Reply With Quote
  #5  
Old 9th June 2006, 01:00 AM
LarryJ Offline
Registered User
 
Join Date: Nov 2005
Location: W. Montana, USA
Posts: 103
Microsoft 6000 wireless mouse (1052) and keyboard(1045) on FC5

It appears the Wireless Laser Desktop 6000 wireless mouse and keyboard show basic functionality with my system running FC5. The "magnify" button isn't functional, of course, as are most of the programmable function keys. If anyone is able to get any of the function keys assigned and working in FC5, please let me know. Thanks.

My /etc/X11/xorg.conf as generated by FC5's install: (relevant sections)

Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "yes"
EndSection

Last edited by LarryJ; 14th June 2006 at 01:46 PM.
Reply With Quote
Reply

Tags
mouse, optical, problem, wireless

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Logitech wireless optical mouse and keyboard doubleA Hardware & Laptops 3 28th November 2008 06:03 PM
Microsoft Wireless Optical Notebook Mouse 4000 JustinGiroux Hardware & Laptops 0 29th April 2006 02:12 AM
Problem with MS Wireless Optical Mouse USB in Fedora2 mikefromcz Hardware & Laptops 1 2nd June 2004 05:40 PM


Current GMT-time: 18:03 (Friday, 24-10-2014)

TopSubscribe to XML RSS for all Threads in all ForumsFedoraForumDotOrg Archive
logo

All trademarks, and forum posts in this site are property of their respective owner(s).
FedoraForum.org is privately owned and is not directly sponsored by the Fedora Project or Red Hat, Inc.

Privacy Policy | Term of Use | Posting Guidelines | Archive | Contact Us | Founding Members

Powered by vBulletin® Copyright ©2000 - 2012, vBulletin Solutions, Inc.

FedoraForum is Powered by RedHat
Komendantsky aerodrom Photos on Instagram - El Palmar - Bairagnia Photos on Instagram