Fedora Linux Support Community & Resources Center
Prev Previous Post   Next Post Next
Old 31st October 2004, 05:52 AM
Dog-One's Avatar
Dog-One Offline
Registered User
Join Date: Sep 2004
Location: NORTHCOM
Posts: 813
Arrow Fedora Installation Options

A commonly asked question among new users and some experienced users is how do I do get this or that during the installation of Fedora Core Linux. Below is a list of command line options that can be used when you first boot from your Fedora distro media--taken from Anaconda-10.0:
Boot time command args:
expert          Turns on special features:
                    - allows partitioning of removable media
                    - prompts for driver disk
noshell         Do not put a shell on tty2 during install.
lowres          Force GUI installer to run at 640x480.
resolution=<mode> Run installer in mode specified, '1024x768' for example.
nousb           Do not load USB support (helps if install hangs
                early sometimes).
nofb            Do not load the VGA16 framebuffer required for doing
                text-mode installation in some languages
nofirewire      Do not load support for firewire devices
askmethod       Do not automatically use the CD-ROM as the install
                source if we detect a Red Hat Linux CD in your CD-ROM drive.
nousbstorage    Do not load usbstorage module in loader.  May help with
                device ordering on SCSI systems.
noparport       Do not attempt to load support for parallel ports
noprobe         Do not attempt to detect hw, prompts user instead.
nopcmcia        Ignore PCMCIA controller in system.
skipddc         Skips DDC probe of monitor, may help if its handing system.
graphical       Force graphical install. Required to have ftp/http use GUI.
text            Force text mode install.
vnc             Enable vnc-based installation. You will need to connect
                to the machine using a vnc client application.
vncpassword=<password>  Enable a password for the vnc connection. This will
                prevent someone from inadvertantly connecting to the
                vnc-based installation.
                Requires 'vnc' option to be specified as well.
vncconnect=<host>[:<port>]   Once installation is up and running, connect to
                the vnc client named <host>, and optionally use port <port>.
                Requires 'vnc' option to be specified as well.
updates         Prompt for floppy containing updates (bug fixes).
isa             Prompt user for ISA devices configuration.
dd              Use a driver disk.
driverdisk      Same as 'dd'.
mediacheck      Activates loader code to give user option of testing integrity
                of install source (if an ISO-based method).
rescue          Run rescue environment.
nomount         Don't automatically mount any installed Linux partitions
                in rescue mode.
nopass          Don't pass keyboard/mouse info to stage 2 installer, good for
                testing keyboard and mouse config screens in stage2 installer
                during network installs.
serial          Turns on serial console support.
ksdevice        Takes an argument like 'eth0', tells install what network
                device to use for kickstart from network.
ks              Kickstart over NFS.
ks=cdrom:       Kickstart from CDROM
ks=nfs:<path>   Kickstart from NFS.
ks=<url>        Kickstart via HTTP.
ks=hd:<dev>     Kickstart via harddrive (dev = 'hda1', for example)
ks=file:<path>  Kickstart from a file (path = 'fd0/ks.cfg')
ks=ftp://<path> Kickstart from FTP.
ks=http://<path> Kickstart from HTTP.
kssendmac       Adds HTTP headers to ks=http:// request that can be helpful
                for provisioning systems.  Includes MAC address of all nics in
                a CGI environment variable of the form
                all nics.
dhcpclass=<class> Sends a custom DHCP vendor class identifier. ISC's dhcpcd can
                inspect this value using "option vendor-class-identifier".
upgradeany      Don't require an /etc/redhat-release that matches the
                expected syntax to upgrade.
lang=<lang>     Language to use for the installation.  This should be a
                language which is valid to be used with the 'lang' kickstart
keymap=<keymap> Keyboard layout to use.  Valid values are those which can be
                used for the 'keyboard' kickstart command.
ip=<ip>         IP to use for a network installation, use 'dhcp' for DHCP.
netmask=<nm>    Netmask to use for a network installation.
gateway=<gw>    Gateway to use for a network installation.
dns=<dns>       Comma separated list of nameservers to use for a network
method=nfs:<path> Use <path> for an NFS installation.
method=http://<path> Use <path> for an HTTP installation
method=ftp://<path> Use <path> for an FTP installation
method=hd://<dev>/<path> Use <path> on <dev> for a hard drive installation
method=cdrom    Do a CDROM based installation.
vnc             Do graphical installation via VNC.  Instead of
                starting a normal X server, vncserver will be started
                and you can then connect remotely to do the
vncpassword=<password>  Set a password for the vnc session.
vncconnect=<host>[:<port>]   Once installation is up and running, connect to
                the vnc client named <host>, and optionally, on port <port>.
                 Requires 'vnc' option to be specified as well.
Below is a list of undocumented commands that I found contained in the anaconda source:
debug           Start up pdb immediately
nofallback      If GUI fails exit
rootpath=       Where to install packages (default /mnt/sysimage)
pcic=           Specify pcmcia controller
overhead=       Override LVM overhead calculation
traceonly       Don't run, just list modules we use
kickstart=      Set serial install and kickstart file
kbdtype=        Set the type of keyboard
module=         Load additional kernel modules
class=          Choose install class to use
autostep        Make kickstart non-interactive
noselinux       Disable Security Enhanced Linux
selinux         Enable Security Enhanced Linux
cmdline         Use command line installer
headless        Automate install for machines with no display
xfs             Allows the creation of a xfs filesystem
reiserfs        Allows the creation of a reiserfs filesystem
jfs             Allows the creation of a jfs filesystem
Please give credit where credit is due--say thanks in the active thread.
Refresh yourself with the Posting Guidelines........Frequently Asked Questions........Registered Linux User #369513

Last edited by Dog-One; 8th November 2004 at 04:58 AM. Reason: Addition of Undocumented Boot Options

fedora, installation, options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Modifying Installation CD Options FasuXe Installation, Upgrades and Live Media 0 25th January 2009 11:04 PM
installation options question ceyesuma Installation, Upgrades and Live Media 0 6th December 2008 06:30 AM
installation options nick.thorley Installation, Upgrades and Live Media 6 15th November 2006 05:09 PM
cannot see the options for the installation screen nitelite Hardware & Laptops 0 19th July 2006 01:58 PM
Installation options massimomm Installation, Upgrades and Live Media 4 7th February 2006 03:47 PM

Current GMT-time: 14:08 (Sunday, 24-09-2017)

TopSubscribe to XML RSS for all Threads in all ForumsFedoraForumDotOrg Archive

All trademarks, and forum posts in this site are property of their respective owner(s).
FedoraForum.org is privately owned and is not directly sponsored by the Fedora Project or Red Hat, Inc.

Privacy Policy | Term of Use | Posting Guidelines | Archive | Contact Us | Founding Members

Powered by vBulletin® Copyright ©2000 - 2012, vBulletin Solutions, Inc.

FedoraForum is Powered by RedHat